MODEL Ucomfort Elite

MODEL Ucomfort Elite

Availability: In stock

Rs 8,999.00

Quick Overview

A non-electric bidet seat that is hygiene for cleansing method that do not require batteries or electricity. It works on your home’s fresh water supply. With a lever control dial the water pressure and temperature is easily adjustable. UC 1000 fulfills every cleansing need at an advantageous price with easy installation and no additional plumbing or electrical requirements.

Name Of TestI.S.I. RequirementOur Value
Water AbsorptionAverage value should not exceed more than 0.5%.Max 0.30% show better Vitrifcation
Crazing TestNo crazing upto 2 Cycles upto 5 hrs. Each cycle or 10 hrs at pressure 0.34 to 0.37 Mps.No problem upto 5 cycles, and no Crazing.
DiscolourationNone on all visible surface.None on all visible surface.
Chemical ResistanceNo loss of reflectivity of the glaze when compared to the control sample.No loss of reflectivity of the glaze when compared to the control sample.
Resistance to Staining and BurningNo stain shall remain on either of the test piece.No stain shall remain on either of the test piece.
Wavy FinishNone on all visible surface.None on all visible surface.
WarpageThe appliance should not throw warpage more than the specified limits.Warpage well within the permissible limits
Modules of Rupture(Breaking Strength)Not less than 60 Mpa.Min 70 Mpa.
Minimum ThicknessShould be min. 6.0 mm at any place.Min. 7.0 mm at any place
Thickness of glaze at any placeNot SpecifiedMin. 700 microns (i.e. 0.7 mm)

ELECTRICAL PLUG POINT :

The receptacle should be located at least 2ft above the floor line & 6in. to the left of the bidet seat.


WATER SUPPLY :

The water pipe has to be of 0.5 inch. The angle cock has to be placed on the right hand side of the commode.


PRESSURE :

The water pipe has to be of 0.5 inch. The angle cock has to be placed on the right hand side of the commode.

U-Comfort Elite Dimensions